Caremo AS520 CONFIGURATION

Local Internet Port (Web-browser)

Connect the Ethernet Port to your local area network (hub or switch) or directly to a PC (using the CAT5 RJ45 patch cable). Then launch the web browser and enter 192.168.1.1 to the web address box, press enter.

Login

You will see the Login interface (on the web browser) when you connect to the device through the Ethernet Port.

With the window active, type admin for both the Username and the Password and then click on the Apply button (The default username and password is admin)

Wizard

You can select the ISP services for each of the following protocols:

• PPP over Ethernet (PPPoE) - Dynamic IP
• PPP over ATM (PPPoA) - Static IP
• RFC-1483 Bridge - modem only

NOTE: The Username and Password fields are required.

• Username: username@streamyx
• Password: your TMNet Streamyx account password
• Confirm Password: re-enter password again for confirmation
• VPI: 0
• VCI: 35

Click on the Apply button to complete the configuration.

Click on the Advance Setting link to go to the Advance Setting page.

Click on Maintenance, click on Save All for permanently saved.

Click Restart.