Huawei SmartAX MT800A CONFIGURATION

1. Connect to 192.168.1.1
2. Key in:
   • Username: admin
   • Password: admin
3. Click on the ATM setting at left side menu
4. Please make sure that VCI-35, VPI-0, Encapsulation-LLC, Connection Type-PPP
5. After you choose PPP, it will prompt different table where u need to choose PPPoA/PPPoE - PPPoE, IP Unnumber-Disable, Default Route-Enable, Username: username@streamyx, Password: your password. Then click Submit
6. Click DHCP Mode and choose DHCP Server
7. Click IP Filter and select Security Level to None and then Submit
8. Click Save and Reboot, Save→ Submit, Reboot→ Submit